The difference between indoor LED display P2.5 vs P3 vs P4 mainly depends on their pixels and spacing. No matter what type of LED display it is, it is divided by pixels and spacing. Of course, it is limited to the same type for comparison. Different types of LED displays, in addition to different pixels and pitches, also have other parameters that are different, so they are generally not used for comparison

Let’s take a look at the difference between the parameters of P2.5 and P3:

P2.5 display: the pixel pitch is 2.5MM, and the pixel point of one square meter is 160000

p2.5 indoor led dispaly
p2.5 indoor led dispaly

P3 indoor display: The pixel pitch is 3MM, and there are 111111 pixels per square. The pixel pitch corresponds to the model and so on: for example, the pixel pitch of the P4 display is 4mm, etc. But pixels are completely different.

p3 indoor led dispaly
p3 indoor led dispaly

There are 62,500 pixels per level of P4. Many people make a mistake and think that the more pixels the better, but this is not entirely true, because there are many product models of indoor LED displays, including P2.5, P3, P4, P5, P6, P7.62, P10, etc., need to be selected according to the actual use distance and scene. The more commonly used indoors are P2.5 and P3. If you need a more refined picture, you can also use a smaller pitch P2 or P1. 875 and other models of LED display.

Some customers will think that the difference between P2.5 and P3 is not too far, and the price should be similar. But in fact, it will be quite different from our understanding. In the field of small-pitch LED displays, even if the price is small 0.1 The float is very large, which is easy to understand.

For example: P2.5 has a pixel pitch that is closer to 0.5MM than P3, and P3 is 1MM closer than P4. In the high-definition led display industry, the spacing of pixels is a technological innovation every time it is close to a unit, so the more the model spacing of the led display is, the more expensive it is.

p2 indoor led dispaly
p2 indoor led dispaly

This is not to say that other models are not good, but it needs to see if the user is using the right place. The further the dot spacing is, the better the picture effect, but there is also a certain optimal viewing distance. If it exceeds the optimal viewing distance of a model, It is not as good as other models. The general formula for calculating the optimal viewing distance in the display industry is: optimal viewing distance = pixel spacing/(0.3-0.8), which is only an approximate range and is only for data reference.

The P2.5 display screen is not the smallest in the industry. Below the P2.5 display screen are P2, P1.923, P1.904, P1.875, P1.667, P1.5 and so on.

The display industry calls all the displays below P3 as small-pitch LED displays, but among these small-pitch manufacturers, only P2 displays are mass-produced with the smallest pitch. So, ah, this is why the price of small spacing is expensive.

P2.5 and P3 display screens have stricter requirements for production, and it is also difficult to maintain when there are some minor faults. The price is even more unaffordable for ordinary users.

Recently, with the improvement of technology and the increase of output, I believe that the price of products will be reduced soon. It is also more troublesome to deal with the problems brought by an expensive product, but aside from these, the visual experience and picture effects of the P2.5 and P3 displays are absolutely nothing to say.

Due to the absence of backlight transmission, the display is directly illuminated by lamp beads, so both P2.5 and P3 display screens have more advantages than P4 display screens in response time, color capability, brightness and other indicators.

From the current point of view, the consumption of P2.5 and P3 displays is aimed at high-end places. Ordinary people do not have a certain level of consumption for it, but I believe that in the future, P2.5 and P3 displays will be available in the market. popularized.

In general, what product to use needs to be combined with the specific usage scenario. If the scenario is large and the budget is relatively tight, the ideal product can be adjusted upward. For example, although the display effect of P3 is good, in order to reduce the budget, then You can also choose the P4’s LED display.

Similarly, if the budget is sufficient, choose a smaller pitch LED display, the graininess is less obvious, and the picture is detailed, and the effect of such a display will be better.

Leave a Comment

Your email address will not be published. Required fields are marked *